1L
4L
20L
200L
 
Available
 
How to open / close the original Japanese canister Mitasu?

1. Pull the ring and remove the lock rim

Нow to use flush fluid

1. Warm engine to operating temperature

MJ-103. MITASU GOLD PAO SN 0W-30 100% Synthetic

MITASU GOLD PAO SN 0W-30 100% Synthetic is a fully synthetic resource conserving motor oil, blended from synthetic base Group IV PAO (Poly-Alpha-Olefin) and Group III and meets the GF-5 standard, set by the International Lubricants Standardization and Approval Committee (ILSAC). The newest ZDDP anti-wear additive package delivers the latest development in lubricating technology to maximize protection and cleanliness for the newest gasoline-fuelled engines.

APPLICATION

MITASU GOLD PAO SN 0W-30 100% Synthetic has been designed for modern cars gasoline engines, operating under heavy duty load and exceeds the most demanding requirements for the latest engine emission control and fuel efficiency. It provides protection from oxidation. It has been designed for all-season use.

SPECIFICATIONS / APPROVALS

∙ API SN
∙ FIAT 9.55535-GS1

APPLICATION BENEFITS

All-season MITASU GOLD PAO SN 0W-30 100% Synthetic provides:

∙ Product's properties stability due to use of Poly-Alpha-Olefin Group base oil
∙ Fuel economy
∙ Maximum engine cleanliness
∙ Seal protection
∙ Extended service life
∙ Easy cold start at as low as -42ºC

The ZDDP anti-wear additive package deposits much less phosphorous on the face of the catalyst, significantly reducing the poisoning of the catalyst system.

The latest technologies of MITASU OIL CORPORATION, Japan and the ILSAC GF-5 standard enable MITASU GOLD PAO SN 0W-30 100% Synthetic to exceed the requirements of such car manufacturers as TOYOTA, HONDA, NISSAN, DAIHATSU, VW, BMW, VOLVO, OPEL, FORD and others.

TECHNICAL CHARACTERISTICS
Technical property Method Result
SAE viscosity grade SAE J300 0W-30
Density at 15°C ASTM D-4052 0,8405
Flash point, °C ASTM D-92 216
TBN (mg KOH/g) ASTM D-2896 6,90
Pour point, °C ASTM D-97 -42
Colour ASTM D-1500 <3,0
Viscosity index ASTM D-2270 193
Kinematic viscosity at 40°C (cSt) ASTM D-445 55,81
Kinematic viscosity at 100°C (cSt) ASTM D-445 10,96

Due to continual product research and development, the information contained herein is subject to change without notification.