4L
20L
200L
 
Available
 


Нow to use flush fluid

1. Warm engine to operating temperature

MJ-731. MITASU FLUSH FLUID

MITASU FLUSH FLUID is a universal washing liquid for use with gasoline and diesel engines. It is suitable for TOYOTA, LEXUS, NISSAN, HONDA, MAZDA, ISUZU, MITSUBISHI, SUBARU, DAIHATSU produced cars, as well as American and European manufactured cars. Recommendation: use MITASU FLUSH FLUID before every change to a new type of motor oil.

INSTRUCTION FOR USE

1. Warm the engine to operating temperature
2. Drain the old oil completely
3. Pour the same amount of MITASU FLUSH FLUID into the engine
4. Start the engine and let it idle for 15 minutes
5. Completely drain out the used MITASU FLUSH FLUID
6. Replace the oil filter
7. Pour the new MITASU OIL into the engine

Recommendation: Replace the oil filter twice to avoid significant contamination of the oil filter with the old oil (the first time, prior to filling the drilling fluid; and finally, when draining the Flush Fluid).

Technical characteristics
Technical Property Method Result
Density at 15 °C ASTM D-4052 0,8582
Flash point, °C ASTM D-92 201
Pour point, °C ASTM D-97 –27
Colour ASTM D1500 <0,5
Viscosity index ASTM D-2270 110
Kinematic viscosity at 40 °C (cSt) ASTM D-445 32,50
Kinematic viscosity at 100 °C (cSt) ASTM D-445 5,50

Due to the continual product research and development, the information contained herein is subject to change without notification.